2. Vacuum Infusion
Step1: Prepare mold and treat the surface with release agent
Step2: Lay the fabric onto the mold
Step3: Place the peel-ply onto the fabric, then the infusion mesh,
finally the bagging film on the top.
Step4: Position the resin inlet and air outlet
Step5: Seal the whole bag
Step6: Connect the vacuum pump, creat a vacuum and test
Step7: Mix the resin with curing and other agent, and defoam
Step8: Infuse the mixed resin in vacuum condition
Step9: Once the fabric is fully impregnated with the resin, unseal the bag, let the air in, then the fabric will rise to the preset height
Step10: Product curing
Find more product details on: http://www.boweafiberglass.com/35-3d-glass-fabric